With spray application, you can say goodbye to the cumbersome hand-held work and achieve considerable time savings. In addition to the efficiency of your working time, there is an ergonomic benefit to be gained by using a spraying system.

Increases efficiency
By spraying, for example, primers, adhesives and putty compounds, you will achieve considerable time savings. According to Wagner, there is a supplier of i.a. spraying system, it is of great importance to replace the hand-held method with a spraying system:

Spraying with a plant is the way of working in the future, as it is efficient to that extent. With spray putty, you achieve a time saving of approx. 50% compared to manual application. And with spray adhesive, you can achieve a time saving of approx. 60% compared to roller application. At the same time, you achieve a uniform application and thus a great end result”, says Claus Christoffersen, who is sales manager at Wagner Spraytech Scandinavia.

Despite the fact that the spray application has a time advantage, this method does not compromise the quality of the work being done. You simply achieve a better result, as you have less afterwork. Likewise, spray application contributes to a higher degree of precision and uniformity.

An ergonomic solution
With a spraying system, you do not only achieve a gain in terms of time. You also invest in the most important thing you have – your health. By using a sprayer, you reduce the risk of physical discomfort, as your body is not exposed to the same physical stress as when using a brush. Graco, which is also a supplier of i.a. spraying system, in addition to the time benefit, emphasizes how much this working method benefits your health:

Spray application is not only a time-saving solution, but just as much an ergonomic solution. The craftsman spares his body with this method”, says Kenneth Lercke, who is sales manager at Graco.

Products for spray application
At Dana Lim, there is no doubt that spraying systems are the future. Therefore, many hours have been spent in the technical department to get the products for these systems to work optimally. When, for example, putty is to come out of a syringe, it is important that it is optimally distributed. This minimizes the need for adjustment. You not only save time on the application, but also the subsequent processes. For example, in connection with putty compound, subsequent sanding is minimized, which is normally a time-consuming process.
Dana Lim has developed both glues, primers and putty compounds for spray technology. It gives you the opportunity to do everything from pre-treatment of the wall to finishing using spraying techniques. The following products can be sprayed on, Fabric filler 226 , Quattro 213 , Wall primer 224 and Roller putty 627 .